淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Nexxim Component Models >
Inductors >
   Inductor, Solenoidal, N Taps       

Inductor, Solenoidal, N Taps

 

[spacer]

Netlist Syntax

ASOLINDNxxxx n1 n2 ... nN N=val DD=val P=val RB=val D=val NT=[val1 val2 ... valN-1] COMPONENT=solenoidal_inductor_n

n1 is the positive node, n2 through nN-1 are the taps, and nN is the negative node of the inductor. The current is assumed to flow from n1 through the inductor to nN.

The parameter COMPONENT=solenoidal_inductor_n identifies the element.

 


Solenoidal Inductor, N Taps Instance Parameters

Instance Parameter

Description

Unit

Default

N

Number of taps

None

None

DD

Diameter of the core

Meter

2.54e-3

P

Physical length

Meter

5.08e-3

RB

Conductor resistivity

m-ohm/cm

1e-3

D

Diameter of the wire

Meter

2.54e-4

NT

Number of turns for each coil section, space-separated list

None

None

Inductor Instance Netlist Example (

ASOLINDN4 net1 net2 net3 net4 net5 N=3 DD=2e-3 P=6.7e-3 RB=5e-4 D=1e-4 NT=[100 200 300 400] + COMPONENT=solenoidal_inductor_n



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com