淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Nexxim Component Models >
Capacitors >
Expression-Based Capacitor Model (Netlist Only)

Expression-Based Capacitor Model (Netlist Only)

The .MODEL statement syntax for the expression-based capacitor specifies values for one or more model parameters.

.MODEL modelname C [modelparameter=]val] ...

**Expression-Based Capacitor Model Parameters**
Instance Parameter	Description	Unit	Default
TC1	1st-order temperature coefficient	°K^-1	0.0
TC2	2nd-order temperature coefficient	°K^-2	0.0
TNOM	Nominal temperature	°C	25

Note

The expression-based capacitor and its corresponding model are available for use in netlists, but are not supported in the Components window of the Designer Schematic Editor.

Expression-Based Capacitor Model Netlist Example

.MODEL MYCAPEX C TC1=0.02 TC2=0.005 TNOM=27

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com