淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Nexxim Simulator >
VerifEye and QuickEye Analyses >
   Running VerifEye Analysis from the Netlist Editor >
       VerifEye Source Netlist Syntax           


VerifEye Source Netlist Syntax

The netlist syntax for the VerifEye Source is:

AEYESOURCExxxx n1 [n2] COMPONENT=EYE_SOURCE
+ RESISTANCE=val
+ VLOW=val VHIGH=val TRISE=val TFALL=val
+ UI=val BPS=val
+ STEP_RESP_NUM_UI=val
+ DCD=val TXRJ=[val ...] TXPJ=[val ...] TXUJ=[val ...]
+ TXCJ='filename'
+ FFE_TAPS=val
+ FFE_LOCS=[ locations ]
+ FFE_WEIGHTS=[ weights ]
+ NORMALIZE_FFE=val
+ FFE_COMPUTE_PROBE='probe_name'

n1 is the node connected to the single-ended source. n2 is the second node on a differential source.

Note 

The Eye sources are internally grounded. All terminals should be connected to signal lines, not directly to ground.

The entry COMPONENT=EYE_SOURCE is required.


Eye Source Parameters for VerifEye

Parameter

Description

Unit

Default

RESISTANCE

Port impedance

Ohm

50

VLOW

Logic low voltage level

Volt

 

VHIGH

Logic high voltage level

Volt

 

TRISE

Low-to-high rise time

Second

 

TFALL

High-to-low fall time

Second

TRISE

BPS

Bit rate for the source

1/Second

None

UI

Duration of the unit interval. When both UI and BPS are given, UI is used.

Second

None

DCD

Duty cycle distortion (Fraction of UI
0 < DCD < 1).

None

 

TXRJ

Transmit Gaussian random jitter (standard deviation). List of values enclosed in brackets.

Second

 

TXPJ

Transmit Periodic random jitter (amplitude). List of values enclosed in brackets.

Second

 

TXUJ

Transmit Uniform random jitter (amplitude). List of values enclosed in brackets.

Second

 

TXCJ

File containing jitter probability density function data. Two-column data specifies times in seconds and corresponding PDF values separated by spaces.

None

None

FFE_TAPS

Number of FFE taps

None

0

FFE_LOCS

Bit locations of FFE taps

None

None

FFE_WEIGHTS

FFE weights

None

None

NORMALIZE_FFE

1=Normalize (sum of absolute values of all weights equals one)

0=No normalization

None

 

FFE_COMPUTE_PROBE

Name of the associated eye probe

None

None

DELAY

Delay offset for transition

Second

 

STEP_RESP_NUM_UI

Number of unit intervals to run step response from

None

 





HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com