淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Nexxim Monte Carlo Analysis >
   Monte Carlo Analysis Netlist Syntax >
       Defining a Monte Carlo Netlist Parameter >
           Uniform Distribution with Absolute Bounds

Uniform Distribution with Absolute Bounds

To define a Monte Carlo netlist parameter with uniform distribution and absolute bounds, use the following syntax:

.PARAM name=AUNIF(nominal_value, absolute_bound [, multiplier])

Monte Carlo values will be generated from a uniform distribution in the range:

(nominal_value - absolute_bound) to (nominal_value + absolute_bound)

If a multiplier is specified, that many values will be generated, the value that has the highest absolute deviation from the nominal value will be used in the simulation, and the other values will be discarded. The default is to do one selection.

For example, to define a uniform distribution with a nominal value of zero and an absolute range of plus or minus five:

.PARAM D1=AUNIF(0, 5)

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com