淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Nexxim Harmonic Balance >
Running Harmonic Balance from the Netlist Editor >
Nexxim Harmonic Balance Netlist Format

Nexxim Harmonic Balance Netlist Format

Harmonic balance can be invoked from the netlist with a .HB statement.

The syntax for 1-tone or N-tone harmonic balance analysis uses parentheses to enclose the vector of tone frequencies and the corresponding vector of harmonics:

.HB TONES=(f1 [, ... fN]) MAXK=(M1 [, ... MN]) [METHOD=HB|SHOOTING] [AUTO_REFINE_SOLUTION=YES|NO] [TRIM_TOL=val] [TSTAB=val]

The parentheses are required for multitone harmonic balance analysis; they can be omitted for one-tone harmonic balance analysis.

The TONES list in the .HB statement specifies the frequencies to use in the analysis. The frequencies of the actual voltage or current inputs to the circuit must be equal to or integer multiples of the TONES frequencies.

See Handling Strongly Nonlinear Circuits for details on the METHOD and TSTAB entries in the HB statement.

See Increasing Accuracy or Speed for details on the AUTO_REFINE_SOLUTION and TRIM_TOL entries in the HB statement.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com