淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Nexxim Simulator >
Nexxim DC Analysis >
   Convergence, Speed, and Accuracy >
       Options that Affect Nexxim DC Convergence Only >
           NR Limiting Step               


NR Limiting Step

The option limiting_step sets the maximum size for changes in node voltages at each step in the Newton-Raphson loop. The default is 0.3 Volts. Use of a limiting step is referred to as “damped Newton-Raphson.” This option trades off the ability to converge and the speed of the simulation. Making the limiting step smaller improves the chance of convergence, but usually increases the number of NR iterations needed to reach convergence. For circuits with nearly linear functions, increasing the limiting step can speed up the simulation.




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com