淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Nexxim Monte Carlo Analysis >
   Monte Carlo Analysis Netlist Syntax >
       Defining a Monte Carlo Netlist Parameter >
           Limit or Min/Max Distribution

Limit or Min/Max Distribution

To define a Monte Carlo netlist parameter with a limit or min/max distribution, use the following syntax:

.PARAM name=LIMIT(nominal_value, absolute_offset])

Either the minimum value (nominal_value - absolute_offset) or the maximum value (nominal_value + absolute_offset) will be selected, with equal probability.

For example, to create a sample set consisting of the two values 5 and 15, you could use:

.PARAM D1=LIMIT(10, 5)

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com