淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Design Examples >
Nexxim RF Design Examples >
Transient Analysis with Sweeps RF >
Perform a Transient Analysis of the Mixer

Perform a Transient Analysis of the Mixer

First, let us perform a transient analysis of this netlist to show the time-domain behavior of the mixer. Later, we shall run a sweep of a circuit parameter.

1. Expand the Analysis icon and double-click the Nexxim Transient setup:

This setup specifies an analysis from time 0 to 60 ns with a maximum timestep of 0.1 ns.

2. To run the transient analysis, right-click the Nexxim Transient and select Analyze. A progress window briefly appears at the lower right to indicate that the transient analysis is being performed. When the analysis is completed, the Message Manager window at the lower left shows the name of the project, errors or warnings if any, and analysis statistics such as CPU time.

3. To view a graph of the results, click the Results icon and select the Transient Startup report.

The Reports window opens with the graph of the transient analysis:

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com