Ansoft公司关于 Ansoft Designer 最新设计实例教程，通过一系列设计实例，讲解Ansoft Designer的使用和操作，是Anosft Designer权威学习教材。主要内容 如下：
Introduction
Designer SI Examples
Chapter 1 – Differential Pair
    1.1 – Nexxim Circuit – Linear/Transient Network Analysis
    1.2 – Nexxim Circuit – HFSS Dynamic Link
    1.3 – Planar EM – Passive Device Modeling
Chapter 2 – Segmented Ground
    2.1 – Planar EM – Passive Device Modeling
    2.2 – Nexxim Circuit – TDR
Designer RF Design Examples
Chapter 1 – Planar Electromagnetics (PEM)
Chapter 1.1 –Antenna Examples
    1.1.1 – Probe Feed Patch Antenna
    1.1.2 – Finite Ground Probe Feed Patch Antenna
    1.1.3 – Slot Coupled Patch Antenna
    1.1.4 – 2.4GHz ISM Circular Polarized Patch Antenna
    1.1.5 – Frequency Selective Surface (FSS) Jerusalem Cross
Chapter 1.2 – Microwave Examples
    1.2.1 – Ring Hybrid
    1.2.2 – Microstrip-Stripline-Microstrip transition
Chapter 1.3 – Filter Examples
    1.3.1 – Low Pass Elliptic Filter
    1.3.2 – Bandstop Microstip Filter
    1.3.3 – CPW Bandpass Filter
Chapter 2 – Nexxim
Chapter 2.1 - Mixer Example
    2.1.1 – DC Analysis
    2.1.2 – AC Analysis

        Ansoft公司关于 Ansoft Designer 2.1 最新例程，通过一系列设计实例，讲解Ansoft Designer的使用和操作。主要内容有：
        0. Ansoft Designer User Interface
        1. Circuit Examples
        2. Planar EM Examples
            2.1 Antenna Examples
                  2.1.1 Probe Feed Patch Antenna
                  2.1.2 Finite Ground Patch Antenna
                  2.1.3 Slot Coupled Patch Antenna
                  2.1.4 ISM Antenna
                  2.1.5 FSS Jerusalem Cross
            2.2 Microwave Examples
                  2.2.1 180deg Ring Hybrid
                  2.3 Filter Examples
                  2.3.1 Low Pass Elliptic Filter
                  2.3.2 Microstrip Bandstop Filter
                  2.3.3 CPW Bandpass Filter
        3. System Examples
        4. Nexxim Examples
            4.1 Mixer Examples
            4.1.1 Mixer DC Analtsis
                  4.1.2 Mixer AC Analysis
        5. Signal Integrity Examples
            5.1 Differential Pair
            5.2 Segmented Ground
        Apx. Designer Training Overview

【简介下载】

         Ansoft Corporation Europe培训用教程，图形辅助讲解，简洁明了，主要内容包括：
        1. Overview of Ansoft Designer GUI
        2. Using interface -- Circuit Design: Building schematic, Analysis circuit, Tuning,
                                            Optimization,Statistical analysis, Layout basic, Building
                                            Hierarchy
        3. LNA Design: Input/output Matching – Smith tool
                                    Nonlinear analysis --RF 1 tone, DC analysis, RF 2 tones, modulation
        4. Load-Pull analysis
        5. Oscillator Analysis: Transient Analysis, Harmonic balance and Phase noise
        6. Field Solver Design basic: Create stack-up, Drawing geometry, Parameterized
                                                           geometry, Analysis
                                                           Co-simulation -- Use field solver simulation in circuit
                                                           designing Planar EM Antenna Design

【简介下载】