微波EDA (www.mweda.com) 网友回复：

• 网友回复

  以前的帖子里面说可以用lump network element里面的电感值来代替虚部。
  不过具体细节不是很清楚。
  望给个解答

• 网友回复

  有谁可以帮忙回答,谢谢.

• 网友回复

  好像现在还不可以 上次说错了 请见谅

• 网友回复

  Macros Construct   Discrete Ports Discrete port with lumped elementThis is useful when the port needs to be matched to an external device whose impedance is not purely real. For example, RFID antennas at low frequencies (in the MHz range) often behave as an inductor: a capacitor needs to be added in series with the discrete port, in order to obtain a good match at the desired frequency.
  
  好像可以完成你要的功能，但是我不知道这么用？
  知道的人说一下哈

  
  Image00000.gif

• 网友回复

  Macros Construct   Discrete Ports Discrete port with lumped elementThis is useful when the port needs to be matched to an external device whose impedance is not purely real. For example, RFID antennas at low frequencies (in the MHz range) often behave as an inductor: a capacitor needs to be added in series with the discrete port, in order to obtain a good match at the desired frequency.
  
  好像可以完成你要的功能，但是我不知道这么用？
  知道的人帮忙说下

  
  Image00000.gif

• 网友回复

  Macros  Construct   Discrete Ports  Discrete port with lumped element
  This is useful when the port needs to be matched to an external device whose impedance is not purely real. For example, RFID antennas at low frequencies (in the MHz range) often behave as an inductor: a capacitor needs to be added in series with the discrete port, in order to obtain a good match at the desired frequency.
  
  
  
  好像可以完成你要的功能，但是我不知道这么用？
  
  知道的人帮忙说下

• 网友回复

  谁可以帮忙解释要如何设置才正确,谢谢.

申明：网友回复良莠不齐，仅供参考。如需专业解答，推荐学习李明洋老师的CST培训视频，或咨询本站专家。